Made in the U.S.A.

I THANK YOU IF YOU ARE CONSIDERING MY GRIZZLY G0602 or G0752 CNC BOLT ON BALLSCREW KIT. THIS KIT COULD TAKE UP TO 7 DAYS AFTER PURCHASE TO SHIP, SO PLEASE MAKE NOTE OF THIS IF YOU DECIDE TO PURCHASE.    THANK YOU!

                       

LATHE, ELECTRONICS & STEPPER MOTORS ARE NOT INCLUDED AND ARE FOR DEMO ONLY!

 

             This Bolt-on X & Z Axis ball screw kit is designed and built by BDTOOLSUSA, not the manufacturer,  to convert your Grizzly G0602 or G0752, 10 x 22 manual lathe to CNC using the  mounts and ball screws supplied in this listing.  All parts are custom made to assure proper fit and are designed to install into the original mounting holes. You have NO holes to drill or tap and NO modification is needed to your lathe to install this kit. I have designed this kit to come to you already assembled and can be installed with minor difficulty. 

The Threading function if needed can be made possible by installing a spindle encoder design of your choice . I do not sale any electronics ,encoders , ect .

​

A )   Both X and Z Axis come with linearmotionbearings style ball screws.

B )   The Gecko 540 Controller used in my videos with Mach3 software worked great even with the  270 oz motors, so anything larger would just be better up to a 3/8  max  Dia. shaft. 

C )   All Custom made aluminum parts come to you with a great looking machine finish as is and any other screws required are included in the kit. See additional pictures of a previous customers color-matched parts for a different look.

X AXIS 

    The X axis comes with a 1 to 1 Belt Drive Ratio that is completely enclosed,  This unit uses Angular Contact Bearings in its newly designed mount. Shown with a Nema23 270 oz Stepper Motor which  shows easy movement and proper function.  This stepper motor was for demo only and can be increased to suit your needs.  The Nema23 motor plate is slotted for easy belt adjustment up front and only takes a second if needed. The X axis will install into the original holes  along with the original screws without removing the cross slide or the Gibb.  The X axis ballscrew is a linearmotionbearings2008  style 12mm single nut  .

​

Z AXIS 

The Z axis is a Direct Drive setup that also uses Angular Contact Bearings  along with a OldHam style  3/8  I.D. Coupler. (Depending on supplier Oldham style Coupler may differ slightly from picture) It will come assembled ready to install into original holes with minimum effort.  This kit is shown with Nema 23s 270 oz motors in the videos, and you can increase to your desired motor size up to a 3/8 dia. shaft.  The Z axis ballscrew is a  linearmotionbearings2008  style 16 mm single nut .

    This kit was crafted with care by an experienced Tool & Die maker to provide you with years of service and make useful parts on a really great little machine. You will not be disappointed in the quality of this kit. The kit will include all mounting block hardware necessary for installation.  All install instructions are sent  by way of e-mail.                       E-mail  me  for any questions you may have about this kit.   Thanks. 

​​